"Over our 25 years of service to you, Plasticair has had some memorable projects that deserve to be high-lighted. We have selected a few occasions that show a wide spectrum of Plasticair’s ability to successfully rise to industry demands and challenges". 

 Industry Sector:     Water Treatment

Located in the Detroit Metropolitan Area.   

Requirement : 1,300,000 CFM extraction of Methane and other dangerous sewer gases.

Plasticair Supplied 23 AMCA Air and Sound Certified Explosion Proof Vane Axial Flow Fans

Industry Sector:    Laboratory Exhaust

Located in the Boston Metropolitan Area.

Requirement: 780,000 CFM extraction of Lab Building Exhaust :

Plasticair supplied 24 Fan Systems that incorporated SKYPLUME technology. The systems are designed to enhance effective plume heights up to and well over100 feet above roof level.

Industry Sector:    Laboratory Exhaust

Located in the Miami Metropolitan Area.

Requirement:: A 23,000 CFM lab Exhaust System designed to withstand hurricane winds of 146 mph.  

Plasticair Supplied a complete FRP SKYPLUME System size 44 that has been witness to the Florida Hurricane season of 2004.

Industry Sector:    Tobacco Curing

Located in Hong Kong.

Requirement:: 80,000 CFM Extraction of hydrogen sulfide and ammonia fumes.   

Plasticair Supplied a complete two stage Polycube Scrubbing System that achieved 99% removal with only 2 gpm per square foot of scrubbing liquor required.

Industry Sector:    Magnesium Processing

Located in Quebec.

Requirement:: 15,000 CFM Extraction @ 29.8” W.G. Static Pressure. The system required, a one hundred percent redundancy, and the fumes present within the air stream where HCl & HF @ 160 F. 

Plasticair Supplied a quantity of two model 28 HPB’s to handle this application. The client saved ten’s of thousands of dollars by selecting Plasticair and FRP construction over exotic metal construction. 

Industry Sector:     Terrorism

Located; Government buildings, Washington D.C.   

Requirement : Anthrax decontamination system

Plasticair supplied this custom unit within ten days. It was designed as a stripper to generate 500 ppm of Carbon Dioxide in offices that contained anthrax particles.  The system was successful in destroying the Anthrax Bacteria. The system was designed within 36 hours with the criteria that it had to be able to be moved throughout all doors and hallways within the building.